25BYT24-48 external linear pm stepper motor/ 15°, 2 or 4phases for
Equipment designers and engineers now have an even more compact
option for their motion applications. Our 25mm PM stepper motor is
especially built with a standard or non-standard leadscrew, which
forms part of the motor shaft negating the need for a shaft to
shaft coupling, thus providing zero transmission error from motor
to screw and shortening the overall linear foot print.
Being combined with nut technology (the white component in the
picture), the PM stepper motor to some extent has become one of the
external linear actuators, which provides customers high
performance and endurance in a very small package. The nut on the
external linear actuator uses the same high-performance engineering
thermoplastics as the rotor drive nut of proprietary non-captive
and captive designs.
This feature ensures trouble free, exceptionally long life
operation. Our external linear PM stepper motor is set at the step
angle of 15 degrees with either 2-phase or 4-phase windings.
They are widely applied to medical instruments, robotics and
|No. of Lines|
Max Holding Torque
|25BY24L012||15||5||12||0.04||300|| || || || || || |
Most of our potential customers or our existing OEM customers would
like to hold a formal or informal discussion with the teams of
Changzhou Sherry International Trading because we fully understand
and know what they are really looking for within China market to
fit their final applications as well as what their preferences are
to focus on by and between the main materials and the cost.
What’s more, our team of quality control will help even our
potential customers with the factory auditing by supplying them
with the pictures of production/inspection capacities of our
sub-contractors even if at the initial stage they are more than
thousands of miles away from our production facilities in China. As
soon as we receive the enquiries from any of our customers, our
teams of both sales and technicians shall work closely to evaluate
them properly to work out the quotes with different options or even
more professional solutions within maximally 5 working days. That
is the reason why we have became one of permanent motor suppliers
to ETM, PARKER in USA and HeCare in EU. Currently we are having a
hot contact with Gast of USA by supplying them with the 3rd run of R&D motor samples, whose first discussion was actually
held as early as in March of 2012.
After the purchase orders are placed during the production we shall
regularly do both an in-line inspection and a final one in
compliance with the formal drawings approved by the customers to
make sure before delivery each of our products are well within the
tolerance. Also we allow our long-term customers to place any
forecast orders, which can be changed or rescheduled if the
scheduled due date is greater than 70 days.
Annually we will pay a visit to our long-term customers to set up a
specific meeting with them. During this meeting, both sides are
having an open and friendly dialog to go through any issues one by
one arising from our products as well as the real applications at
the site of the final consumers. After these kinds of visits upon
an evaluation on either some of complaints if any or some of
reasonable feedback, we shall more understand where we are in this
motor industry and shall take some positive measures to improve our
products quality in the near future.